🇦🇺AUSTRALIAN MADE AUSTRALIAN STOCK USING AUSTRALIA POST
This setup is perfect for anyone wanting to setup a system in the back of the ute or if you have a fridge in a compartment traping the hot air in making the fridge overwork.
This setup has also been used to remove hot air from Generator Boxes allowing them to operate while the box is closed.
One fan will remove the hot air while the other draws the cooler air in.
SOME ASK WHAT ARE THE DIFFERENCES?
The difference is we make all our own fans and controllers to our specifications and quality. There is not a computer fan in sight.
All our fans are built exclusively for us and are under continual review to make them better and quieter.
Our fans have a built in obstruction detection device just in case the fans become fouled for any reason. Just one difference out of many.
5600 series = 80CFM ( cubic feet per minute ) or 2300CMM ( cubic metre per minute) PER FAN
Noise = 30dBA per fan
4600 CMM Litres air movement PER MINUTE TOTAL.
* all figures are +- 10%
5600 series fans and TE8 controller preset at 35 on and 30 off ( can be reset by you if the temps are not suitable)
120mm x 120mm x 38mm each fan
TE8 Controller for compact and easy placement. Only 60mm wide x 45mm high and 30mm deep
A inline switch is included however you will need to advise us exactly how far from the controller you would like like it placed inline or it will be included loose with the kit for you to install. The switch could be handy on dirt roads
100 cm wire to each fan
50 cm wire to 12v source
100cm temp probe back to controller
WHITE VENTS AS PER THE PICTURE ARE NOT INCLUDED IN KIT
Dust filter covers as per the picture will be included
( if a different wire length would be suitable please ask)
One blowing cooler air in and the other extracting the hot air out.
This item will be sent by AUSTRALIA POST and a tracking number will be provided.
🇦🇺All Karls Kool RV Fridge Fan Kits are IP Rights Protected
💁🏼♂️Protected under Intellectual Property Registration number 201611853