TE8O Inside/Internal Fridge Fan 80mm with TE8 CONTROLLER OUTSIDE of fridge Suitable for Gas or Compressor Fridges Australian Made & Aus Stock
Regular price
$149.99
Sale
🇦🇺AUSTRALIAN MADE, 🇦🇺AUSTRALIAN STOCK FOR DESPATCH USING AUSTRALIA POST
If you think your fridge is working well then this will take it to a whole new level.
Just have a look at your home fridge for example.
I bet it has a built in fan to circulate the air?
This little ripper has the internal fan measuring only 25mm wide by 80mm high and 80mm long only on the inside of the fridge and the control box measuring 85mm wide( inc. attachment tabs) x 45mm high and 30mm deep showing the inside fridge temperature of the fridge on the OUTSIDE
This will allow the control box to be placed inside a nearby cupboard and you can see the inside temperature WITHOUT OPENING THE DOOR
Both the fan and temp probe go inside only. (SEE WIRE LENGTHS AT BOTTOM OF DESCRIPTION)
So if you are concerned about space or just want to see what the temperature is inside the fridge without opening the door this is the model for you
COMES WITH A INLINE SWITCH
Your fridge will always frost from the RH side so the position of the fan is crucial
No need for two or three fans especially if they are positioned in the wrong spot.
Please check the door frame of your fridge. If the frame/ door seal area heats it will transfer to the temp readout giving a incorrect reading. If this is case from time to time the temp will be incorrect. If this concerns you please order the inside controller model.
Manufacturers have been using the “ Frost Free “ label for decades and this is how they do it.
A small outlay for a great result.
Regardless if you have a THETFORD , DOMETIC OR ANY OTHER CARAVAN/ MOTORHOME/RV FRIDGE . This will MAKE A HUGE DIFFERENCE
GETS RID OF 95-100% of ice build up inside the fridge....
NEVER HAVE TO DEFROST THE FRIDGE AGAIN...
Circulate cool air around the inside of the fridge eliminating hot spots
COMES WITH A 12 Month/ 1 Year warranty.
INTERNAL FRIDGE FAN TO CIRCULATE COLD AIR AROUND YOU FRIDGE.
The unit comes preset
FAN IS PERFECTLY SIZED 80mm x 80mm x 25mm
The external controller/readout measures 85mm wide ( inc.attachment tabs) x 45mm high x 30mm deep.
The unit amp draw is .2amp while on standby and .3amp while the fan is running
Eliminates HOT AND COLD sections in your fridge for a overall cold temperature though out the WHOLE FRIDGE.
Doesn't take up any space.
FAN IS MOUNTED TO THE SHELF BLOWING OVER THE BACK COOLING FINS.
Pictures will be supplied of how and where the fan is to be mounted
Can be taken off and fitted to any future fridges.
When the fridge/fan is first turned on the fan will run until the lower temp is reached and then it will turn off.
SUITABLE FOR ANY FRIDGE! FAN IS THIN, brushless, ultra-quiet, high volume low 12v draw and state of the art controller.
Feel the cold air in your fridge when you open the door.
Will CIRCULATE COLD AIR AROUND INSIDE OF FRIDGE
No switches to turn on and off
State of the art programmable digital controller
Only a 12v source required
Very small wire to run out of fridge. Will not change or damage seals
Does NOT lose preset temperatures when disconnected from battery
Comes pre programmed to set and forget.
Pre Programmed to come on and off
If the setting is not suitable very easily reprogrammed by yourself.
YOU are in control of the settings
INSTALL
Very easy to install.
Wires are negative black(-) and positive red (+)
Will make the inside cooler by circulating cold air.
All fitting instructions will be sent with the order
PERFECT MATCH WITH THE BACK HEAT EXTRACTING FANS ALSO AVAILABLE.
- All wiring included
- Inline switch
- 85cm cm wire from fans to controller
- 350mm to 12v source
- 85cm from controller to temp pickup
SHIPPING DETAILS
This item will be sent by AUSTRALIA POST and a tracking number will be provided.