TE8I  Inside/Internal Fridge Fan 80mm with TE8 controller on inside Suitable for Gas or Compressor Fridges Australian Made & Australian Stock

TE8I Inside/Internal Fridge Fan 80mm with TE8 controller on inside Suitable for Gas or Compressor Fridges Australian Made & Australian Stock

Regular price $145.99 Sale

or 10 interest free payments starting from $14.59 with What's this?

🇦🇺AUSTRALIAN MADE, 🇦🇺AUSTRALIAN STOCK FOR DESPATCH USING AUSTRALIA POST 

 

JUST PLACE IN THE FRIDGE AND WIRE UP.  

Perfect for any upright fridge inc. KINGS and BUSHMANS FRIDGES  

We don’t connect the fans to back fins so there is NO vibration transferred into the van. The biggest complaint from other internal kits  

Overall Dimensions including stand are 90mm wide x 120mm long x 85mm high. 

If you think your fridge is working well then this will take it to a whole new level.

YOU JUST DONT NEED TWO OR THREE FANS. JUST A WASTE IF POWER. Draws only .2amp in standby and .3amp running.
 
Your fridge will always frost from the RH side so the position of the fan is crucial

No need for two or three fans especially if they are positioned in the wrong spot.  

Just have a look at your home fridge for example.

I bet it has a built in fan to circulate the air when the door is shut?

COMES WITH A INLINE SWITCH 

Manufacturers have been using the “ Frost Free “ label for decades and this is how they do it.

A small outlay for a great result.

Regardless if you have a THETFORD , DOMETIC OR ANY OTHER CARAVAN/ MOTORHOME/RV FRIDGE . This will MAKE A HUGE DIFFERENCE  

GETS RID OF 95-100% of ice build up inside the fridge....

NEVER HAVE TO DEFROST THE FRIDGE AGAIN...

This Units mounts the fan and controller inside the fridge.

If you are seeking to run the controller outside and only have the fan inside the fridge please see the other model in the range

Circulate cool air around the inside of the fridge eliminating hot spots 

COMES WITH A 12 Month/ 1 Year warranty.

INTERNAL FRIDGE FAN TO CIRCULATE COLD AIR AROUND YOU FRIDGE.

 

SETTINGS

The unit comes preset

FAN IS 80mm x 80mm x 25mm

Eliminates HOT AND COLD sections in your fridge for a overall cold temperature throughout the WHOLE FRIDGE.

Doesn't take up any space.

FAN IS MOUNTED TO THE SHELF BLOWING OVER THE BACK COOLING FINS. PICTURES WIIL BE SUPPLIED WITH THE FITTING INSTRUCTIONS INCLUDED WITH THE KIT. 

Can be taken off and fitted to any future fridges.

When the fridge/fan is first turned on the fan will run until the lower temp is reached and then it will turn off.

SUITABLE FOR ANY FRIDGE!

FAN IS THIN, brushless, ultra-quiet, high volume low 12v draw and state of the art controller.

Feel the cold air in your fridge when you open the door. 

Will CIRCULATE COLD AIR AROUND INSIDE OF FRIDGE

No switches to turn the fan on and off

State of the art programmable digital controller

 

💁🏼‍♂️WHAT DO I NEED TO DO PRE ORDER:

Please locate a 12V source which is required. Once you have that installation  time usually takes 20-30mins.

Very small wire to run out of fridge. Will not change or damage seals on fridge.

The interior unit comes with MIN 30cm probe length and 300cm 12v wire.

Draw is only .2Amps when fans are running.

Does NOT lose preset temperatures when disconnected from battery

Comes pre programmed to set and forget.

Pre Programmed to come on and off

If the setting is not suitable very easily reprogrammed by yourself.

YOU are in control of the settings

Very easy to install.

Wires are negative black(-) and positive red (+)

Will make the inside cooler by circulating cold air.

All fitting instructions will be sent with the order   

PERFECT MATCH WITH THE BACK HEAT EXTRACTING FANS ALSO AVAILABLE.

  • All wiring included.
  • Stand to secure fan and controller 
  • inline switch 
  • 350cm to 12v source
  • Min 30cm from controller to temp pickup

SHIPPING DETAILS 

This item will be sent by AUSTRALIA POST  and a tracking number will be provided.